欢迎来到尧图网

客户服务 关于我们

您的位置:首页 > 财经 > 金融 > Using the ST-LINK/V2-1 to program and debug the STM32 on board

Using the ST-LINK/V2-1 to program and debug the STM32 on board

2024/10/25 3:26:20 来源:https://blog.csdn.net/lljss1980/article/details/141209457  浏览:    关键词:Using the ST-LINK/V2-1 to program and debug the STM32 on board
1. Using the ST-LINK/V2-1 to program and debug the STM32 on board

To program the STM32 on the board, plug in the two jumpers on CN2
要对板上的STM32进行编程,请插入CN2上的两个跳线
在这里插入图片描述
2. 单片机供电
在这里插入图片描述
在这里插入图片描述

在这里插入图片描述

标有IDD的跳线JP6用于测量STM32微控制器的功耗
拆下跳线并连接电流表:
•跳线打开:STM32微控制器已通电(默认)。
•跳线关闭:必须连接电流表才能测量STM32微控制器
电流。如果没有电流表,则STM32微控制器未通电
在这里插入图片描述

版权声明:

本网仅为发布的内容提供存储空间,不对发表、转载的内容提供任何形式的保证。凡本网注明“来源:XXX网络”的作品,均转载自其它媒体,著作权归作者所有,商业转载请联系作者获得授权,非商业转载请注明出处。

我们尊重并感谢每一位作者,均已注明文章来源和作者。如因作品内容、版权或其它问题,请及时与我们联系,联系邮箱:809451989@qq.com,投稿邮箱:809451989@qq.com