基于EPS32C3电脑远程开机模块设计

前言

缘起，手头资料太多了，所以想组一台NAS放在家里存储数据。在咸鱼淘了一套J3160主板加机箱，加上几块硬盘组建NAS。

对于NAS，我的需求是不用的时候关机(节省功耗)，要用的时候开机。

网上的开机棒太贵了，也不够安全。

还不如自己制作一个，趁暑假期间(没去实习好亏），刚好手头有一些之前本科毕设用剩下的ESP32C3模块。加上继电器就可以实现远程开机了。

云平台选择腾讯的物联开发平台。无他-因为有ESP32官方例程。

工程修改自乐鑫官方的
Smart Light 使用 ESP32、ESP32S2 配合 腾讯连连小程序 演示了一个智能灯控制方案。

所以这里就不展示其配置过程了，详细内容见Smart Light的README。

接线原理图

IO2–IN

COM–BN

NO–PowerSW

DC±-3V3

DC–GND。

基于EPS32C3电脑远程开机模块接线

代码

short_switch就是短按。短按开机。

long_switch就是长按。长按强制关机。

GPIO初始化

继电器控制的引脚初始化。对于IO2。

esp_err_t lgpio_init()
{//zero-initialize the config structure.gpio_config_t io_conf = {};//disable interruptio_conf.intr_type = GPIO_INTR_DISABLE;//set as output modeio_conf.mode = GPIO_MODE_OUTPUT;//bit mask of the pins that you want to set,e.g.GPIO18/19io_conf.pin_bit_mask = GPIO_OUTPUT_PIN_SEL;//disable pull-down modeio_conf.pull_down_en = 0;//disable pull-up modeio_conf.pull_up_en = 0;//configure GPIO with the given settingsgpio_config(&io_conf);return gpio_set_level(GPIO_OUTPUT_IO_0,1);
}

app_main.c初始化


static esp_err_t example_driver_init(void)
{lightbulb_config_t config = {//1. Select and configure the chip
#ifdef CONFIG_LIGHTBULB_DEMO_DRIVER_SELECT_WS2812.type = DRIVER_WS2812,.driver_conf.ws2812.led_num = CONFIG_WS2812_LED_NUM,.driver_conf.ws2812.ctrl_io = CONFIG_WS2812_LED_GPIO,
#endif
#ifdef CONFIG_LIGHTBULB_DEMO_DRIVER_SELECT_PWM.type = DRIVER_ESP_PWM,.driver_conf.pwm.freq_hz = CONFIG_PWM_FREQ_HZ,
#ifdef CONFIG_IDF_TARGET_ESP32C2/* Adapt to ESP8684-DevKitM-1 * For details, please refer to: * https://docs.espressif.com/projects/espressif-esp-dev-kits/zh_CN/latest/esp8684/esp8684-devkitm-1/user_guide.html*/.driver_conf.pwm.invert_level = true,
#endif
#endif
#ifdef CONFIG_LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E.type = DRIVER_SM2135E,.driver_conf.sm2135e.freq_khz = 400,.driver_conf.sm2135e.enable_iic_queue = true,.driver_conf.sm2135e.iic_clk = CONFIG_SM2135E_IIC_CLK_GPIO,.driver_conf.sm2135e.iic_sda = CONFIG_SM2135E_IIC_SDA_GPIO,.driver_conf.sm2135e.rgb_current = SM2135E_RGB_CURRENT_20MA,.driver_conf.sm2135e.wy_current = SM2135E_WY_CURRENT_40MA,
#endif// 2. Configure the drive capability.capability.enable_fades = true,.capability.fades_ms = 800,.capability.enable_status_storage = false,.capability.mode_mask = COLOR_MODE,.capability.storage_cb = NULL,//3. Configure driver io
#ifdef CONFIG_LIGHTBULB_DEMO_DRIVER_SELECT_PWM.io_conf.pwm_io.red = CONFIG_PWM_RED_GPIO,.io_conf.pwm_io.green = CONFIG_PWM_GREEN_GPIO,.io_conf.pwm_io.blue = CONFIG_PWM_BLUE_GPIO,
#endif
#ifdef CONFIG_LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E.io_conf.iic_io.red = OUT3,.io_conf.iic_io.green = OUT2,.io_conf.iic_io.blue = OUT1,.io_conf.iic_io.cold_white = OUT5,.io_conf.iic_io.warm_yellow = OUT4,
#endif//4. Limit param.external_limit = NULL,//5. Gamma param.gamma_conf = NULL,//6. Init param.init_status.mode = WORK_COLOR,.init_status.on = false,.init_status.short_on = false,.init_status.long_on = false,.init_status.hue = 0,.init_status.saturation = 100,.init_status.value = 100,};return lightbulb_init(&config);
}

控制继电器开闭

简单的控制继电器的操作，通过输出引脚低电平控制继电器闭合。

esp_err_t lightbulb_set_short_switch(bool status)
{esp_err_t err = ESP_OK;LIGHTBULB_MUTEX_TAKE(portMAX_DELAY);s_lb_obj->status.short_on = status;if (status == true){gpio_set_level(GPIO_OUTPUT_IO_0,0);vTaskDelay(1500 / portTICK_RATE_MS);gpio_set_level(GPIO_OUTPUT_IO_0,1);s_lb_obj->status.short_on = !status;}LIGHTBULB_MUTEX_GIVE();return err;
}esp_err_t lightbulb_set_long_switch(bool status)
{esp_err_t err = ESP_OK;LIGHTBULB_MUTEX_TAKE(portMAX_DELAY);s_lb_obj->status.short_on = status;if (status == true){gpio_set_level(GPIO_OUTPUT_IO_0,0);vTaskDelay(15000 / portTICK_RATE_MS);gpio_set_level(GPIO_OUTPUT_IO_0,1);s_lb_obj->status.short_on = !status;}LIGHTBULB_MUTEX_GIVE();return err;
}

获取腾讯云指令按钮的值

bool lightbulb_get_short_switch(void)
{LIGHTBULB_CHECK(s_lb_obj, "not init", return ESP_ERR_INVALID_ARG);LIGHTBULB_MUTEX_TAKE(portMAX_DELAY);bool result = s_lb_obj->status.short_on;LIGHTBULB_MUTEX_GIVE();return result;
}bool lightbulb_get_long_switch(void)
{LIGHTBULB_CHECK(s_lb_obj, "not init", return ESP_ERR_INVALID_ARG);LIGHTBULB_MUTEX_TAKE(portMAX_DELAY);bool result = s_lb_obj->status.long_on;LIGHTBULB_MUTEX_GIVE();return result;
}

任务切换逻辑

获取腾讯云参数后进入相应的函数。
设置继电器引脚–控制继电器通。
设置继电器引脚–控制继电器断。
更新按钮的状态。
将值写回参数上传回腾讯云。


/* Callback to handle commands received from the QCloud cloud */
static esp_err_t light_get_param(const char *id, esp_qcloud_param_val_t *val)
{if (!strcmp(id, "power_switch")) {val->b = lightbulb_get_switch();} else if (!strcmp(id, "value")) {val->i = lightbulb_get_value();} else if (!strcmp(id, "hue")) {val->i = lightbulb_get_hue();} else if (!strcmp(id, "saturation")) {val->i = lightbulb_get_saturation();} else if (!strcmp(id, "comp_switch_s")) {val->b = lightbulb_get_short_switch();} else if (!strcmp(id, "comp_switch_l")) {val->b = lightbulb_get_long_switch();}ESP_LOGI(TAG, "Report id: %s, val: %d", id, val->i);return ESP_OK;
}/* Callback to handle commands received from the QCloud cloud */
static esp_err_t light_set_param(const char *id, const esp_qcloud_param_val_t *val)
{esp_err_t err = ESP_FAIL;ESP_LOGI(TAG, "Received id: %s, val: %d", id, val->i);if (!strcmp(id, "power_switch")) {err = lightbulb_set_switch(val->b);} else if (!strcmp(id, "value")) {err = lightbulb_set_value(val->i);} else if (!strcmp(id, "hue")) {err = lightbulb_set_hue(val->i);} else if (!strcmp(id, "saturation")) {err = lightbulb_set_saturation(val->i);} else if (!strcmp(id, "comp_switch_s")) {err = lightbulb_set_short_switch(val->b);} else if (!strcmp(id, "comp_switch_l")) {err = lightbulb_set_long_switch(val->b);} else {ESP_LOGW(TAG, "This parameter is not supported");}/* Report driver changes to the cloud side */esp_qcloud_iothub_report_all_property();return err;
}

腾讯云三元组配置

安装云平台的内容一一对应填入。

腾讯云平台的内容

更改数据模板

添加数据模板

{"version": "1.0","profile": {"ProductId": "65BEMES9XM","CategoryId": "141"},"properties": [{"id": "power_switch","name": "电灯开关","desc": "控制电灯开灭","required": true,"mode": "rw","define": {"type": "bool","mapping": {"0": "关","1": "开"}}}, {"id": "comp_switch_s","name": "电脑开关点按","desc": "电脑开关机点按","required": true,"mode": "rw","define": {"type": "bool","mapping": {"0": "关","1": "开"}}},{"id": "comp_switch_l","name": "电脑开关长按","desc": "电脑开关机长按","required": true,"mode": "rw","define": {"type": "bool","mapping": {"0": "关","1": "开"}}},{"id": "saturation","name": "饱和度","desc": "","mode": "rw","define": {"type": "int","min": "0","max": "100","start": "0","step": "1","unit": ""},"required": false}, {"id": "value","name": "明度","desc": "","mode": "rw","define": {"type": "int","min": "0","max": "100","start": "0","step": "1","unit": ""},"required": false}, {"id": "hue","name": "色调","desc": "","mode": "rw","define": {"type": "int","min": "0","max": "360","start": "0","step": "1","unit": ""},"required": false}],"events": [{"id": "hardware_fault","name": "Hardware_fault","desc": "Report hardware fault","type": "fault","required": false,"params": [{"id": "name","name": "Name","desc": "Name like: memory,tf card, censors ...","define": {"type": "string","min": "0","max": "64"}}, {"id": "error_code","name": "Error_Code","desc": "Error code for fault","define": {"type": "int","unit": "","step": "1","min": "0","max": "2000","start": "1"}}]}],"actions": []
}