欢迎来到尧图网

客户服务 关于我们

您的位置:首页 > 房产 > 家装 > vivado PIN

vivado PIN

2024/10/25 14:27:10 来源:https://blog.csdn.net/cckkppll/article/details/139755063  浏览:    关键词:vivado PIN

描述
引脚是基元或层次单元上的逻辑连接点。引脚允许
要抽象掉单元格的内容,并简化逻辑以便于使用。引脚可以
是标量的,包含单个连接,或者可以定义为对多个进行分组的总线引脚
信号在一起。
相关对象
引脚连接到一个单元,并且可以通过网络连接到其他单元上的引脚。的引脚
单元格还与bel对象的bel_pins或该单元格所在的site的site_pins相关
映射到。引脚作为时钟域的一部分与时钟相关联,并且是的一部分
timing_path(定义为路径的起点、终点或通过点时)。
端号也可以与drc_contractions相关联,以便更快地定位和
解决设计问题。
属性
PIN对象包括一组属性,这些属性定义了时钟和
控制引脚。在编写Tcl时,可以使用这些属性按类型筛选引脚列表
脚本,或使用PIN对象。下表列出了这些特性。

除了这些定义端号类型的属性之外,pin上的各种属性
对象包括以下内容:

Property Type Read-only Visible Value
BEL string false true
BUS_DIRECTION enum true true
BUS_NAME string true true
BUS_START int true true
BUS_STOP int true true
BUS_WIDTH int true true
CLASS string true true pin
CLOCK_DEDICATED_ROUTE enum false true
DCI_VALUE int false true
DIRECTION enum true true IN
ESSENTIAL_CLASSIFICATION_VALUE int false true
FB_ACTIVE bool false true
HD.ASSIGNED_PPLOCS string* true true
HD.CLK_SRC string false true
HD.LOC_FIXED bool false false 0
HD.PARTPIN_LOCS string* false true
HD.PARTPIN_RANGE string* false true
HD.PARTPIN_TIEOFF bool false true
HD.TANDEM int false true
HIERARCHICALNAME string true false
top.cpuEngine.dwb_biu.\retry_cntr_reg[0] .C
HOLD_DETOUR int false true
HOLD_SLACK double true true needs timing update***
IS_CLEAR bool true true 0
IS_CLOCK bool true true 1
IS_CONNECTED bool true true 1
IS_ENABLE bool true true 0
IS_INVERTED bool false true 0
IS_LEAF bool true true 1
IS_ORIG_PIN bool true true 0
IS_PRESET bool true true 0
IS_RESET bool true true 0
IS_REUSED bool true true 0
IS_SET bool true true 0
IS_SETRESET bool true true 0
IS_WRITE_ENABLE bool true true 0
LOGIC_VALUE string true true unknown
MARK_DEBUG bool false true
NAME string true true
cpuEngine/dwb_biu/retry_cntr_reg[0]/C
ORIG_PIN_NAME string true true
PARENT_CELL cell true true
cpuEngine/dwb_biu/retry_cntr_reg[0]
REF_NAME string true true FDCE
REF_PIN_NAME string true true C
SETUP_SLACK double true true needs timing update***
TARGET_SITE_PINS string* false true
XLNX_LINE_COL int false false
XLNX_LINE_FILE long false false
The properties of pins can be listed with the following command:
report_property -all [lindex [get_pins] 0]

版权声明:

本网仅为发布的内容提供存储空间,不对发表、转载的内容提供任何形式的保证。凡本网注明“来源:XXX网络”的作品,均转载自其它媒体,著作权归作者所有,商业转载请联系作者获得授权,非商业转载请注明出处。

我们尊重并感谢每一位作者,均已注明文章来源和作者。如因作品内容、版权或其它问题,请及时与我们联系,联系邮箱:809451989@qq.com,投稿邮箱:809451989@qq.com